English
23
B660M-HDVP/D5 R2.0
H610M-HDVP/D5 R2.0
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, 2, No. 19)
This header is for connecting
audio devices to the front
audio panel.
Chassis Fan Connector
(4-pin CHA_FAN2)
(see p.1, 2, No. 16)
Please connect fan cable to
the fan connector and match
the black wire to the ground
pin.
Chassis/Water Pump Fan
Connector
(4-pin CHA_FAN1/WP)
(see p.1, 2, No. 20)
This motherboard
provides a 4-Pin water
cooling chassis fan
connector. If you plan to
connect a 3-Pin chassis water
cooler fan, please connect it to
Pin 1-3.
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1, 2, No. 3)
This motherboard provides
a 4-Pin CPU fan (Quiet Fan)
connector. If you plan to con-
nect a 3-Pin CPU fan, please
connect it to Pin 1-3.
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
J_SENSE
OUT2_L
1
MIC_RED
OUT_RET
OUT2_R
MIC2_R
MIC2_L
GND
PRESENCE#
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL
1
2
3
4
GND
+12V
CHA_FAN_SPEED
FAN_SPEED_CONTRO
L
1 2 3 4
CPU_F
+12V
GND
AN_SPEED
FAN_SPEED_CONTROL
4 3 2 1
Содержание B660M-HDVP/D5 R2.0
Страница 17: ...English 14 5 7 6 4 ...
Страница 19: ...English 16 2 2 Installing the CPU Fan and Heatsink 1 2 C P U _ F A N ...
Страница 21: ...English 18 1 2 3 ...