- 40 -
Name:
Descriptive name of your choice
Email Address:
enter sender’s (the network camera) email address
Mail Server:
URL of mail server (IP address or host name)
Username and Password:
Enter the Username and Password for authentication if necessary.
5.4.4
Server I/O
GPIO:
is used to configure normal circuit status for receiving and triggering Alarms.
GPIN 1 Normal Status: sets “Open
”
or “Close
”
for the Normal Status of GPIN circuit
GPOUT 1 Normal Status: sets “Open
”
or “Close
”
for the Normal Status of GPOUT circuit
Post Alarm:
Set the duration of action after the event happened from 1 ~ 200 seconds.
5.5
Network Settings
The Network Settings page allows the user to change and add more sophisticated configurations based on the
network infrastructure where the Network Camera is installed.
As for the IP Discovery Tool is useful for initial boot up and straight network configuration, the Network
Settings page offers a flexible way to fully utilize the network capabilities.
