- 32 -
Respond to Trigger (Activated Time)
Always:
always keep the Network Camera alert to wait for some condition to happen.
Only during time frame:
it will perform the action only for the time frame set. This is different from
the Schedule condition, since the Schedule condition sets the time as the main reason to start
doing something, while the “time frame” sets the duration of the action.
Check the corresponding days to execute the triggering time.
Start Time:
indicates that time that the trigger will be start executing
End Time:
indicates that time that the trigger will be end executing
Interval:
indicates the interval between each action.
Duration:
indicates the duration of the trigger from the Start Time.
Temporal Disable:
don’t do anything while activated. In other words, even if the condition has
happened the Network Camera shall not do anything. This option is useful to pre-set conditions
that will probably be used in the future by desire, but that hasn’t to be activated now.
When Triggered…(Do some action with a result)
