ASENWARE Addressable Fire Alarm Control Panel, Руководство пользователя

Страница: 34 / 66

ASENWARE LTD.
34
3.3.1.2.4 Device Settings
In this sub-menu of PANEL SETUP, user can define and assigned the devices name which can
be configured in Register ( described in later sections). Figure 3.14 shows the Device Settings
window.
Figure 3.14 Device Settings Window Screen
3.3.1.3 Register
Sub-menu REGISTER is the most important window for programming. In this sub-menu, user can
assign the addresses, product type, devices and location to all devices. In the address column,
user can assign the addresses which he/she planned for each devices e.g smoke detectors, heat
detectors, monitor modules etc.
As shown in Figure 3.15, window has information for all devices’s addresses , location and
status, if it is registered or not.
Note : Before making any input in this window, user is highly recommend to assign zones,
addresses and thoroughly planned layout must be filled in sheet(s).
Suggested Procedure :
Step 1 : Choo
se the Loop first to which user is going to assign addresses. ‘Green right
click’ represents selected (current loop) and ‘red cross’ means this loop is not selected at this
moment, refer Figure 3.15.