ASENWARE Addressable Fire Alarm Control Panel Скачать руководство пользователя страница 22

Страница: 22 / 66

ASENWARE LTD.

2.3.5

Disable and Testing Event

2.3.5.1

Disablement and Testing of Device

When any point (detector or module) is isolated (disabled) or being tested individually, control

panel indicates disabled points or testing condition by displaying on the screen its disabled or

testing condition, respectively. It will not cause any alarm and if more than one point is disabled

or tested, most recent one will be on top.

2.3.5.2

Disablement and Testing of Zone

When the complete zone(s) is(are) being disabled and tested, control panel indicates disabled

points or testing condition by displaying on the screen disabled or testing condition, respectively.

•

Yellow

General Disable LED ‘ON’ for disablement of zone or any device disablement

•

Yellow

Test

LED ‘ON’ for testing of zone or any device

•

Display the message on

GENERAL Window

for the zone or device testing or disablement

condition e.g. if zone 5 is disable, “Zone 5 is disable” will appear on the screen.

Note : Settings and procedure for testing and disablement are described in subsequent chapters

2.4 PRINTING REPORTS

Printing report can be obtained (if printer installed ), which gives the information of all events

occurred. Owner can keep the records for future analysis as History can store up to 1000 fire

events.

Содержание Addressable Fire Alarm Control Panel



































































Результаты поиска

Содержание Addressable Fire Alarm Control Panel

Отзывы:

Похожие инструкции для Addressable Fire Alarm Control Panel

Бренды по названию

Популярные бренды

ASENWARE Addressable Fire Alarm Control Panel, Руководство пользователя

Результаты поиска

Содержание Addressable Fire Alarm Control Panel

Отзывы:

Похожие инструкции для Addressable Fire Alarm Control Panel

Бренды по названию

Популярные бренды