ASENWARE Addressable Fire Alarm Control Panel Скачать руководство пользователя страница 9

Страница: 9 / 66

ASENWARE LTD.

1.4.3 Input Method

From the display, it is very convenient for the programmer to input and register the devices.

1.4.4 Power Supply

The power supply is designed to supply power to all devices in the system. The system adopts

the special firefighting equipment powered with DC 24V output, which can provide alarm or

feedback signals, such as main power fault, battery fault, battery under-voltage and battery

charging, and have a good capacity for interference.

Customer is recommended to do battery calculation for proper rating of batteries

1.4.5 Loop Card

The loop card is used as the driver of detector/module bus, which may drive 250 intelligent
detectors or intelligent modules and can be equipped with bus type fire indicating panel.

1.4.6 Interconnection with Devices

The system can get access to various intelligent smoke, heat or combination detectors

produced by the manufacturer, and the main types include detectors, modules, horn strobes ,

manual call point and so on.

The system can be interconnected to Modules, Manual Call Point, Relays, Deluge vale

and Gas System. The system can get access to multiple intelligent modules e.g. Input module

AW-D110 , Control Module AW-D112 , Supervisory Module and Isolator Module AW-D111 and

D114 respectively. Moreover, it can also get access to intelligent sounder visual indicator AW-

D106, and intelligent manual call point AW-D105. Panel can be configured with Gas

Extinguishing system, deluge system or other water based system and supervisory of various

types of valves.

1.4.7 Printer

The system is equipped with a special mini-printer as standard, which can print alarm,
supervisory and fault messages for future reference.

Содержание Addressable Fire Alarm Control Panel



































































Результаты поиска

Содержание Addressable Fire Alarm Control Panel

Отзывы:

Похожие инструкции для Addressable Fire Alarm Control Panel

Бренды по названию

Популярные бренды

ASENWARE Addressable Fire Alarm Control Panel, Руководство пользователя

Результаты поиска

Содержание Addressable Fire Alarm Control Panel

Отзывы:

Похожие инструкции для Addressable Fire Alarm Control Panel

Бренды по названию

Популярные бренды