Asema E, Руководство пользователя

Страница: 40 / 54

System setup 35 / 49
6.3.4. Restrictions
Restrictions can be used to temporarily disable appliances, buttons and sensors, based on a time
frame or price limit. For example, if you have your outdoor lights connected to a sensors, and you
do not want this sensor to work after you have gone to bed, you can simply disable them between
11PM until 6AM. Or, if you do not want your water heater to go on when the electricity price is
high, you can put a price limit, which will disable it as long as the price is over the limit.
6.3.4.1. Time restriction
6.3.4.1.1. Adding a time restriction on the device
1. Go to Main Setup > Actions > Restrictions
2. Click on "Add Time". This will open up a form.
3. Select the item you want to restrict. Then set start and an end time to create a time frame in
which this item will be restricted.
Please note: Setting a start time that occurs at a later time than the start time will schedule the
restriction to apply to a period that passes midnight. Be careful when selecting the times. If the
end time is accidentally a few minutes before the start time, for example: start time = 15:00,
and end time =14:58, the time frame will simply run on until 14:58 the next day.
4. Tap OK and the restriction will be saved.
6.3.4.1.2. Adding a time restriction in the WebView
1. Go to WebView > Actions > Restrictions.
2. Click on "Add time". This will open up a form.
3. Select the item you want to restrict. Then set start and an end time to create a time frame in
which this item will be restricted.
4. To save, navigate away from the page by clicking on "Asema" in the upper left corner.
6.3.4.2. Price Restriction
6.3.4.2.1. Adding a price restriction on the device
1. Go to Main Setup > Actions > Restrictions
2. Click on "Add price". This will open up a form.
3. Select the item you want to restrict. Then set a price limit above which this item will be restricted.
4. Tap OK and the restriction will be saved.
6.3.4.2.2. Adding a price restriction in the WebView
1. Go to WebView > Actions > Restrictions.
2. Click on "Add price". This will open up a form
3. Select the item you want to restrict. Then set a price limit above which this item will be restricted