Asema E, Руководство пользователя

Страница: 47 / 54

System setup 42 / 49
6.6.3. E-view
These are the settings for the E-view.
• Default screenlet: this is the screenlet that you start by clicking on the "E" button in the E-view,
and the one that gets activated after the default screenlet activation time.
• Default screenlet activation time: the time that the device has to remain idle before it activates
the default screenlet automatically.
• Orientation: the orientation of the device screen. The Asema E is designed and set by default in
Landscape mode, but can also be used in Portrait mode. If you want and it fits your home better,
you can install the Asema E to your wall vertically. Changing the orientation setting changes
the orientation of all screenlets accordingly to support your installation. Note that the menus
in Main Setup cannot be rotated.
6.6.4. Device buttons
By default the two large buttons on the Asema E are assigned to the Home and Away profile, but
you can assign a different function to them. Note however that this will automatically disable the
default Home and Away profile function, as each device button can only have one function.
• Label:
This field can be used to change the label in the E-view that points to the buttons. By default the
fields are empty, and the device buttons are labeled as HOME and AWAY in the E-view. Simply
tap on the text field to enter a new label.
• Connected to:
This shows the item that is currently assigned to the button. By default the left button is as-
signed to HOME and the right button is assigned to AWAY. To change the item, follow these
steps:
1. Click on the gear icon for the button you want to edit. This will open up a form.
2. Select which item (Home or Away profile, Appliance or Theme) you would like to assign and
click on the arrow pointing to the right. This will "move" the item to the right field, which
indicates the currently assigned item. (By default this field is empty, but if you have assigned
a custom item before, you will first need to remove that. You can do that by selecting the
item and tapping on the arrow pointing to the left.) Once your preferred item is assigned,
click "OK" to save.
3. You will be returned to the Device Buttons page. Check under "Connected to" if it says the
correct item. If all the settings are correct, then click on the E in the upper-right corner to
return to the E-view and test the new Device Button settings.
6.6.5. LEDs
On this page you can configure the settings for the LED lights.
• Color sliders
On both sides of the page you see a color slider. This indicates the default color of the LED.
Simply slide the slider up and down to adjust the color to your liking. You will immediately see
the change in the LED.