Asema E, Руководство пользователя

Страница: 27 / 54

System setup 22 / 49
6. System setup
6.1. Screenlets
6.1.1. Settings
Each screenlet has different kind of settings, allowing you to customize the screenlet to your needs.
The Screenlet settings can be accessed in three different ways as described in the sections below:
6.1.1.1. Access all screenlets settings on the Asema E
1. Go to Main Setup > Screenlets > Settings. This will give you a list of all the screenlets you have
currently installed.
2. Click on the screenlet you want to configure to see its settings.
3. Change the settings according to your preference. Changes are saved automatically.
6.1.1.2. Access all screenlet settings in the WebView
1. Go to WebView. Then click on the Tab "Screenlets". This will open up the Screenlets Install menu.
2. On the left-hand side, click on the tab "Settings". This will give you a list of all the screenlets
that are installed.
3. Click on the screenlet you want to configure to see the settings.
4. Change the settings according to your preference. Changes are saved automatically.
6.1.1.3. Access the settings of the current running screenlet on the
Asema E.
1. When running a screenlet, open the left-hand navigation menu.
2. Then click on the Gear Icon to access the settings for the screenlet you are currently running.
3. Change the settings according to your preference. Changes are saved automatically.
6.1.2. Installing Screenlets
6.1.2.1. Installing screenlets with the device
1. Go to Main Setup > Screenlets > Install
2. Click on the screenlet you want to install. In the pop-up window, click Install. Press OK.
3. Wait a few seconds until the screenlet is installed and you will get a notification.
4. Click on the E icon to return to the E-view and run the screenlet.