Asema E, Руководство пользователя

Страница: 31 / 54

System setup 26 / 49
5. Click OK. The controller will now be saved and you will be returned to the list of controllers,
including the unpaired ones. Repeat step 4-5 for all unpaired controllers until all controllers are
paired.
6. You're done! The controller will now also automatically be added to the ON/OFF, Power Con-
sumption History, and Power Meter screenlets and appear there when you run these.
6.2.2. Appliance groups
You can combine appliances into a group, which will allow you to control multiple appliances at
once. For example, appliances such as a TV, HI-FI system and DVD player can be combined into
a group "Entertainment System".
Each group has one appliance that is assigned as the master appliance. All other appliances follow
the master. So every device in the same group is turned ON when the master device turns ON.
The similar happens for OFF direction.
6.2.2.1. Creating appliance groups on the device
1. Go to Main Setup > Appliances > Groups
2. Click on "New".
3. Fill in a name for the group.
4. Click on "Add appliance". To select the appliance that you want to add, click on the button saying
"..." under "Appliance". Then click on the room, and then click on the appliance, and then click "OK".
5. You will be returned to the "Edit Appliance Group" page. To add more appliances to the group,
repeat step 2. Once you are done, simply click "OK" and the group will be saved.
6.2.2.2. Creating appliance groups in the WebView
1. Go to WebView > Appliances > Appliance groups.
2. Click on "Add Group".
3. Click on "Add member". Click on the button that says "None selected". This will open up an
overview of your appliances. Click on the room that your appliance is in (If you haven't specified
any rooms yet, then all appliances are found under "No Room"). Click on the appliance that you
want to add to the group and click "OK".
4. The group will be saved automatically when you navigate away from this page, for example
when you go back to the dashboard.
6.2.3. Sensors
Sensors (such as wireless motion detectors) can be connected to the Asema E as remote controls.
Taking wireless sensors into use is called "pairing".
6.2.3.1. Pairing sensors on the device
1. Go to Main Setup > Appliances > Sensors.