IAD_DGS_X08_10EP
XDS-108X Series
Quick Start Guide
This printed quick guide provides a quick walk-through of the set up process. For
complete documentation, please visit
Box Content
Mounting and Installation
Standard VESA mount
This smart signboard accepts a MIS-D (75 mm x 75 mm) VESA-Compliant
mounting interface and the recommended screw is M3 x 7.5 mm exclud-
ing bracket thickness. Use the flush mount screw provided in-box to easily
install the flush mount bracket onto the smart signboard.
Reseting smart signboard to factory default
Factory reseting the smart signboard will result in the removal of all saved con
-
tents, passwords, and configurations in settings. Please refer to the steps below
to complete the smart signboard factory reseting process:
Please follow the instructions below to collect the player's DEBUG log:
How do I provide a DEBUG log for a misbehaving signboard to the support team?
Troubleshooting
Press at one corner of the screen and hold for 10 seconds
to exit playback and enter setup menu.
How do I interrupt playback and enter setup menu?
Prepare a blank USB stick in FAT-32 format.
1
Create a folder named "DEBUG" (case insensitive) in the root of USB stick.
2
Make sure the player is operating (see welcome screen or playing content).
3
Insert the USB stick into player and wait for 30 seconds.
4
Within the "DEBUG" folder, is a folder with a string of number as its name.
If the string of numbers are all zero's, the debug log has not been collected
properly. Repeat step 1-4 again and make sure to wait the 30 seconds.
5
Zip the"DEBUG" folder and send to IAdea Support Team.
6
Use a pen to press and hold the reset button - do not release until Step 4.
1
Insert the power cord.
2
Wait 30 seconds for the system reboot indicating your data is erased.
3
Release the reset button and your smart signboard will initialize in factory
default state.
4
1
2
Flush mount
1
2
Smart signboard
Power adapter with
changeable plug
Flush mount bracket
with screw
