User manual for ASIN Aqua
22
Safety functions
ASIN Aqua is equipped with safety functions that prevents pool from overdosing .
ASIN Aqua uses following safety functions:
y
Maximum safety dose
y
Too rapid pH change
y
Dosing without a probe response
Maximal safety dose
If you setup water parameters correctly, ASIN Aqua calculates
maximum volume of disinfection agent that can be dose in a hour .
Thanks to this function extreme overdose is unlikely .
The maximal hourly safety dose varied from 1 to 11 ml/m
3
per hour .
For extreme conditions is 25 ml/m
3
per hour .
Too rapid pH change
It can be caused by heavy rain, filling of
large volume of water or extreme use,
if that happens ASIN Aqua stops dosing
pH agent for 2 hours and when pH value
settles ASIN Aqua starts dosing again .
The pH change without probe response.
Depending on water hardness setting, ASIN Aqua
reports error and stop dosing pH agent:
y
Soft to moderately hard < 9 °dH.
If there is a no change on the
pH value ASIN Aqua stop dosing
pH agent after 10 doses .
y
Hard 9–21 °dH.
If there is a no change on the
pH value ASIN Aqua stop dosing
pH agent after 15 doses .
y
Very hard >21,01 °dH.
If there is a no change on the
pH value ASIN Aqua stop dosing
pH agent after 25 doses .
.
