User manual for ASIN Aqua
4
About ASIN Aqua
ASEKO’s ASIN Aqua gives you pool clean and sparkling water with the minimum
amount of chemicals . By directly measuring and controlling the free
chlorine content or redox potential of your pool water with advanced CLF
(free chlorine) or redox probe . ASIN Aqua tunes your pool water using the
minimum amount of chlorine, eliminating the smell and burning of over-
treated pools . With a touch screen interface, you have complete control over
measurement and regulation of your pool . ASIN Aqua operates with your
existing pool filtering equipment . ASIN Aqua works also on time dosing system
for chlorine-free oxygen based desinfection agent dosing as SANOSIL .
Health and Safety
ASIN Aqua allows you to comply with hygiene rules for the
physical and chemical requirements for pool water quality .
Install your ASIN Aqua indoor away from dust and high humidity
and make sure all electrical connections are secure .
Do not open your ASIN Aqua or exchange any of the internal parts .
This will damage the electrical integrity of ASIN Aqua .
The chemicals used with the ASIN Aqua must be handled in a safe manner
to prevent damage or personal harm . Aseko recommends you always
use personal protective safety equipment when handling the pH and
chlorine agents .
Refer to the Materials Safety Data Sheet (MSDS).
WA R N I N G:
Never mix the pH agent with the chlorine agent . When
carrying out maintenance on the clear plastic tubes or valves always rinse
with clean water to prevent mixing of the pH and chlorine agents .
Power supply
230 V / 50 Hz
Power consumption
14 VA
Fuse
T80 mA
Over-voltage category
II
Ingress protection
IP50
Operating temperature
and humidity
+5 to +40°C / 60%
Weight
2,2 kg
Emplacement
wall-mounted
Measured and regulated value
Free chlorine or Redox, pH
Pump power
60 ml/min . / max 1 bar
Measuring water pressure
max 1,5 bar
