User manual for ASIN Aqua
19
The first CLF calibration
1.
Using the Aseko test
kit provided, manually
check the chlorine
level of your pool by
taking a sample from
the output stream
of pool water .
2.
From the start screen
of your ASIN Aqua
select SETTINGS
and then CALIBRATION .
3.
Select the yellow chlorine box on the left of the screen . If the probe is
broken or have any other malfunction the following notification is given .
4.
Compare the reading given on your ASIN Aqua with the reading taken
manually . If different adjust the reading on the ASIN Aqua by pressing
the + and – buttons so that they match and press OK to save
When your manual chlorine readings match the ASIN AQUA
readings, your probe is accurately reading chlorine levels .
R E CO M M E N DAT I O N:
Check your chlorine level in your pool once a week.
The table below gives the recommended levels of chlorine for your pool .
This varies with the temperature of your pool and should never be less
than 0 .3mg/l .
Chlorine Level mg/l
Water Temperature
0 .3 – 0 .5
24 – 26 °C
0 .5 – 0 .8
26 – 32 °C
0 .8 - 1
Over 32 °C
0,8
0,3
0,4
0,6
0,5
Displayed value
Use aseko tester
