Aseko ASIN AQUA Home VS, Руководство пользователя

Страница: 25 / 44

EN 25
Wait at least 1 hour. Optimally up to 24 hours
Before opening the water supply to the probes, the water must be clean
and the chlorine concentration measured by the colorimeter or Pool
Tester must be within the range 0.3 to 1.2 mg/l.
If the concentration is lower , repeat superchlorination. If the
concentration is higher , wait till the chlorine concentration in the water
drop down.
Open the water supply to the probes
Warning No flow to probes turns off automatically.
pH Setting
Considering that the ASIN AQUA Home water treatment system is efficient
in the broad pH range, it is useful to enter the required pH value equal to pH
value of water you refill or slightly lower.
Required pH value = refilled water pH value (in the range from 6.8 to
7.5)
pH may change during operation but if it is in the range from 6.8 to 7.5 you
do not have to change this setting.
ALGICIDE Setting
A sufficiently effective dose for most pools is 10 ml/m
3
per day. If green
algae appear in the pool, you can increase the dose. After algae have
disappeared, the dose can be returned to 10 ml.
FLOC+C Setting
The FLOC + C dose is governed by the amount of circulating water, which
flows through the filtration.
Based on your circulating pump discharge (in m3 per hour), adjust the
FLOC+C dose value. This value ranges from 10 to 40 ml per hour for most
domestic pools.
OPEN CLOSE
OPEN