Aseko ASIN AQUA Home VS, Руководство пользователя

Страница: 21 / 44

EN 21
Smart Heating
Water Temperature Measurement and Heating Control
The high-accuracy electronic thermometer is used to measure water
temperature. This should be installed to the inlet pipe coming from the pool.
Never mount it downstream of the heat exchanger. Significant distortion of
temperature occurs. When temperature drops below the required value, the
relay switches on your heat source (heat pump, electric heating, gas boiler
circulating pump).
Heating Control Function Takes Priority over Filtration Control
If you select the temperature control to take priority over the filtration
timer, heating as well as the circulating pump will be in operation even after
the adjusted filtering time has elapsed. The pump will stop only after the
required temperature has been achieved.
Heating Time Adjustment
This function allows to adjust day time for which heating will be in operation.
This is particularly useful for switching on the heat pumps that have a higher
efficiency during the day when outdoor temperature is higher, eventually to
eliminate the time when noise from heat pump disturbs you neighbor.
Heating at Outdoor Temperature (above or below)
This function allows to adjust outdoor air temperature at which or below
which ASIN AQUA Home starts heating. This function requires installation
of the
outdoor air thermometer . This function is useful to control
effectiveness of air heat pumps eventually to eliminate heating when you do
not use the pool.