Aseko ASIN AQUA Home VS, Руководство пользователя

Страница: 17 / 44

EN 17
Installation Test
WARNING: Any obstacles, bubbles or leaks in the connecting tube will
prevent ASIN AQUA Home from correct operating. The clear plastic tube
allows you to monitor flow of liquid to the injecting valves.
Before commencing the operation, test ASIN AQUA Home installation. Most
problems result from incorrectly performed installation.
Test
In the “Test of Outputs” menu, gradually start all the pumps and while they
are running, check tightness of all the PE tube connections. Check the
injecting valves for blockage and air bubbles in the PE tube.
Press to
TURN ON (GREEN)
and press again to
TURN OFF
.
DO NOT FORGET! Provide the testing run and stop of all accessories
connected to ASIN AQUA Home. At this step just test, do not dose the
aids or provide the initial dose of chemicals!
CHLORINE pH ALGICID FLOCC
1.
2.
3.
Check tightness of all the
connections.
Liquid must reach spraying and
subsequently the tube.
If bubbles occur here, the
pump draws air in. Repair the
connection - disconnect the
tube, cut the end carefully in
90° angle and plug it back.
Monitor level in the
transparent plastic tube.