Aseko ASIN AQUA Home VS, Руководство пользователя

Страница: 16 / 44

EN 16
RCD
Proudový
chránič
30 mA
Max 1,4 kW
230 v~
230 V / 50 Hz
CHLORINE pH ALGICID FLOCC
Residual
current
device,
30 mA
230 V / 50 Hz
Max. 1,4 kW
230 V~
Power Supply
Connection to the mains:
1.
Leave the mains switch in the off position.
2. Connect the filtering device to the ASIN AQUA Home switched socket
outlet (filtration power supply - max. 1.4 kW / 230 VAC).
3.
Connect the 230 V / 50 Hz mains cable to ASIN AQUA Home (on the right
side). The mains socket outlet must be protected by a residual current
device (RCD).
4. Change the mains switch over to the on position.
After Device has been switched on, the display will come on and the ASIN
AQUA Home starting screen will appear.
Disconnection from the mains:
1.
Change the mains switch over to the off position.
2. Disconnect the ASIN AQUA Home mains cable from the 230 V / 50 Hz
socket outlet.
3.
Disconnect the filtering unit mains cable from ASIN AQUA Home.
WARNING:
If Device is used in the manner different from that specified by
the manufacturer, protection provided by Device may get damaged.
Power supply 230 V / 50 Hz
Power consumption 24 VA
Power consumption (including filter pump) 1449 VA
Maximum input power of connected
filtration 1.4 kW / 230 VAC
Fuse T800 mA; T160 mA; T6,3 A
Over-voltage category II
Ingress protection IP30
Operating temperature +5 to +40°C
Weight 6.7 kg
Installation wall mounted
Relay output contacts 230 V / 1,4 kW
Discharge of dosing pumps 60 ml / min / max. 1bar
Measured water pressure max. 1 bar
(must not be vacuum)
Dimensions 430 x 330 x 160 mm
Installation must be
protected by a residual
current device (RCD).