Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
Operation and Maintenance
227
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
6. 5. 1. 2
Event tables
Event tables list all the event messages the PBX is capable of generating (see
).
The frequency of event messages can range between "0" and "20".
The time period is indicated in hours, ranging between "0" and "672". The longest
time period "672" corresponds to 28 days or 4 weeks.
If the frequency of event messages is set to "0", the time period will also automati-
cally be set to "0". No event message is sent to a signal destination.
If the frequency of event messages is set to "1", the time period will automatically
be set to "0".
The event message will immediately be sent to the signal destinations.
If the time period is set to "0" hours, the frequency of the event message will auto-
matically be set to "1".
The event message will immediately be sent to the signal destinations.
There are 4 event tables in the Fault & Maintenance Manager. Each event table can
be individually configured and allocated to one of the 4 signal destinations. This
means it is possible to decide which event message – if any – should be sent to a
particular signal destination either immediately, with a delay or not at all.
Total Synchronization loss
Synchronization with network has failed on all
T / T2 interfaces
Date, time
Trial licence expired
The duration for which a trial licence can be
used for a specific feature has expired and
there is no valid licence.
Licence ID, date, time
User alarm
With *77[nnnn] from a terminal
nnnn [0000...99999], user
number, date, time
User does not answer
No answer to incoming DDI call from user on S
bus or AD2
DDI No., date, time
V.24 of the Voice Mail System
defective
Invalid characters received on V.24 interface
for Voice Mail Server
Date, time
Voice Mail System defective
Voice Mail Server does not respond to mes-
sages via V.24
Date, time
Wake-up call unanswered
Room wake-up call not answered
Room No., date, time
Event/ error message
Trigger condition
Details
