Ascon Tecnologic - K__V - Indicators - ENGINEERING MANUAL - PAG. 10
[16] o2Ac - Output 2 action
Available:
When [14] o2F is different from “nonE”
Range:
dir =
Direct action
rEU = Reverse action
dir.r = Direct action with revers LED indication
rEU.r = Reverse action with reverse LED indication.
Note:
For more details see [13] o1.Ac parameter.
[17] o3F - Out 3 function
Available:
When the instrument has out 3 option
Range:
nonE = Output not used. With this setting the status
of the this output can be driven directly
from serial link.
AL =
Alarm output
t.out = Timer output
t.HoF = Timer out - OFF in Hold
or.bo = Out-of-range or burn out indicator
P.FAL = Power failure indicator
bo.PF = Out-of-range, burn out, Power failure indicator
diF.1 = The output repeates the digital input 1 status
diF.2 = The output repeates the digital input 2 status
St.By = Stand By status indicator
Note:
For other details see [11] O1F parameter
[18] o3.AL - Alarms linked up with Out 3
Available:
When [17] o3F = AL
Range:
0... 15 with the following rule:
+1 = Alarm 1
+2 = Alarm 2
+4 = Alarm 3
+8 = Alarm 4
+ 16 = Sensor break (burn out)
Note:
For more details see [13] o1.AL parameter
[19] o3Ac - Output 3 action
Available:
When [17] o3F is different from “nonE”
Range:
dir =
Direct action
rEU = Reverse action
dir.r = Direct action with revers LED indication
rEU.r = Reverse action with reverse LED indication.
Note:
For more details see [13] o1.Ac parameter.
[20] o4F - Out 4 function
Available:
When the instrument has out 4 option
Range:
nonE = Output not used. With this setting the status
of the this output can be driven directly
from serial link.
AL =
Alarm output
t.out = Timer output
t.HoF = Timer out - OFF in Hold
or.bo = Out-of-range or burn out indicator
P.FAL = Power failure indicator
bo.PF = Out-of-range, burn out, Power failure indicator
diF.1 = The output repeates the digital input 1 status
diF.2 = The output repeates the digital input 2 status
St.By = Stand By status indicator
Note:
For other details see [11] O1F parameter
[21] o4.AL - Alarms linked up with Out 4
Available:
When [20] o4F = AL
Range:
0... 15 with the following rule:
+1 = Alarm 1
+2 = Alarm 2
+4 = Alarm 3
+8 = Alarm 4
+ 16 = Sensor break (burn out)
Note:
For more details see [13] o1.AL parameter
[22] o4Ac - Output 4 action
Available:
When [20] o4F is different from “nonE”
Range:
dir =
Direct action
rEU = Reverse action
dir.r = Direct action with revers LED indication
rEU.r = Reverse action with reverse LED indication.
Note:
For more details see [13] o1.Ac parameter.
]
AL1 Group - Alarm 1 parameters
[23] AL1t - Alarm 1 type
Available:
Always.
Range:
nonE = Alarm not used
LoAb = Absolute low alarm
HiAb = Absolute high alarm
LHAb = Absolute band alarm
SE.br = Sensor break
Note:
The (SE.br) sensor break alarm will be ON when the
display shows
----
indication.
LoAb
OUT
AL1
AL1
PV
HAL1
time
HiAb
off
off
off
OUT
AL1
AL1
PV
HAL1
time
off
off
off
ON
ON
ON
ON
LHAb
PV
AL1H
HAL1
time
off
off
off
OUT
AL1
AL1L
HAL1
ON
ON
[24] Ab1 - Alarm 1 function
Available:
AWhen [24] AL1t is different from “nonE”
Range:
0... 15 with the following rule:
+1 = Not active at power up.
+2 = Latched alarm (manual reset)
+4 = Acknowledgeable alarm
Example:
setting Ab1 equal to 5 (1+4) the alarm 1 will be
“not active at power up” and “Acknowledgeable”.
Notes: 1.
The “not active at power up” selection allows you
to inhibit the alarm function at instrument power
up. The alarm will be automatically enabled
when the measured value reaches, for the first
time, the alarm threshold plus or minus the
hysteresis (in other words, when the initial alarm
condition disappears).
