TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
48
3
Enter user name and password for a system administrator.
4
Click "OK" to login.
Following tasks can be done:
•Managing the default system administrator account, see
The Default System
Administrator Account
on page 48.
•Managing additional system administrator accounts, see
Additional Administrator
Accounts
on page 48.
The Default System Administrator Account
The default system administrator account can be modified but cannot be deleted. To
modify the default system administrator account, do as follows:
1
Login as system administrator (see
Log in as System Administrator
).
2
Select General > Admin.
3
Select/Enter the following settings:
Field name
Description
• Device Name
Enter a description for the device.
• User Name
Enter a login user name.
• Password
Enter a password.
• Confirm Password
Confirm the password.
Note:
Only changing the password will not result in the settings being saved. For
the settings to be saved, both user name and password must be updated at the
same time!
4
Click "OK".
Additional Administrator Accounts
Note:
To create additional administrator accounts, Kerberos must have been configured
(see
8.1.3
Centralized Management of Administrator/Auditor Accounts Using Kerberos
on
page 61).
To create an additional administrator account, do as follows
:
1
Log in as system administrator (see
Log in as System Administrator
on page 47).
2
Select General > Kerberos
3
On the next free account row in the Users section:
• Enter User Name
• Enter Password
• Enter Password again
• Select
Administrator
(for System Administrator) or
Auditor
in the drop-down list
(See
7.3.2
Access Levels
on page 46 for a description of access levels.)
4
Click "OK".
The account row is created.
To modify an additional administrator account, do as follows
:
1
Log in as system administrator (see
Log in as System Administrator
on page 47).
2
Select General > Kerberos
