TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
119
4
On each mapping line, a Call Number Type can be selected from the Call Number
Type drop-down list (found on the righthand side of the lines).
NOTE: This step is optional.
Possible values are:
• Unknown: The mapping applies to unknown, external calls
• ISDN: The mapping applies to external calls
• Private: The mapping applies to internal calls
5
On each mapping line, a Call Number Format can be selected from the Call Number
Format drop-down list (found on the lefthand side of the lines).
NOTE: This step is optional.
The table below describes of the possible values:
Name
Description
Typical use
Abbreviation
Unknown
Unspecified
Called number in
outgoing calls
u
Subscriber
Call number in local
network
Number called in
incoming calls.
s
National
Call number with area
code.
Calling number from
home country.
n
International
Call number with
country code and area
code.
Calling number from
abroad.
i
Abbreviated:
Unusual.
a
Network-
specific
Unusual.
x
Call Number Formats Table
6
Click “OK”.
8.13.4 Gatekeeper Interfaces
Gatekeeper (GK) interfaces are channels to the world of Voice over Internet Protocol
(VoIP). If your IP-DECT system needs to communicate with other devices via VoIP, access to
these devices can be configured as a Gatekeeper interface.
Note:
Normally the Master connects to a PBX via H.323/SIP endpoint registrations. In that
case, no configuration in this section is needed.
These can be different types of equipment:
• Remote PBX
• Ascom VoIP Gateways
• VoIP terminal equipment
• VoIP terminal adapters to connect analogue terminals or a IPBS
• CGPN out
If you want to edit the calling number of outgoing calls.
• CDPN in
If you want to edit the called number of incoming calls.
• CDPN out
If you want to edit the called number of outgoing calls.
