TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
105
8.7.5
Module Fault List
It is possible to change the severity level on alarms and events generated in the IP-DECT
system.
1
Select UNITE > Module Fault List. A list of alarms and events generated in the IP-
DECT system is shown with their fault codes (IP-DECT code and Unite code). Alarms
are listed with a
Yes
and events are listed with a
No
in the column
Persistant
.
2
To change the severity level on an alarm/event: Select in the
Seriousness
drop-down
list one of the following:
•
Disabled
(The alarm/event will not be sent to the Unite system.)
•
Information
•
Warning
•
Error
•
Critical
3
Click "OK".
Except for severity level
Disabled
, the alarm/event will be sent to the Unite system
with changed severity level.
8.8
Import and Export a Central Phonebook
Note:
If the phonebook functionality in the IPBS/IPBL is enabled, then the SMS feature in
the IMS3/Unite CM is disabled. If an IMS3/Unite CM is connected, the central phonebook
should be located in the IMS3/Unite CM instead of the IPBS/IPBL.
Import Entries to the Central Phonebook from a csv file
Note:
A csv file can contain max 1000 users.
The csv file to be imported to the phonebook shall have the following format:
First name 1
;
Last name
1
;
Telephone number 1
First name 2
;
Last name 2
;
Telephone number 2
or
First name 1
,
Last name
1
,
Telephone number 1
First name 2
,
Last name 2
,
Telephone number 2
Note:
When importing a central phonebook file in csv format, existing entries are deleted.
1
Select "Central Phonebook".
2
Select the
Enable
check box.
3
Select file type for the csv file in the
File Type
drop-down list.
4
If so needed, select separator for the csv file in the
Delimeter
drop-down list.
5
Click "OK". The options
Import
and
Export
are displayed.
6
Select Import > Choose File.
7
Locate the csv file in the system and select Open > Next. Make sure the correct
number of entries are correct.
8
Click "Close"
