TD 92816EN
17-July 2012 / Ver. B
31
Programming and Installation Manual
Care Phone
7
Commands to the Care Phone
The person answering the alarm can by pressing buttons on the phone give
commands to the Care Phone and set it in different modes. These commands
differ between different protocols and alarm receivers. Below the commands of
the home phone protocol are listed. For other protocols, see the specification of
the protocol and talk to the current alarm central on what commands to use.
7.1
Home phone
Command
Action
1, 3
Switch to simplex mode, change speech direction
2
Switch to duplex mode
5
Increase microphone and speaker
6
Disconnect the call
7
Switch to simplex mode, connect microphone
8
Switch to simplex mode, connect speaker
9
Relay action
Image 18
.
Turn the new silicon cover
inside out and place it
against the circuit board
before you turn it back.
Image 19
.
Attach the ring by pressing it on from
the back of the transmitter until a
click sound is heard. Make sure the
elevation on the inside of the ring fits
to the notch of the plastic bottom
part of the transmitter.
