ARTE NIREAS, Инструкция по установке и эксплуатации

Страница: 6 / 30

Ε
ΓΧΕΙΡΙ∆ΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
&
ΧΡΗΣΗΣ
WATER HEATING FIREPLACE
| NIREAS
5 |
Σελίδα
3. E
NDORSEMENTS
& C
ERTIFICATIONS
3.1. Endorsement
The ARTE® fireplace you chose has been tested according to
EN13229
.
3.2. Declaration of Performance CE
The constructor G. Karnoutsos & Co. declares that ARTE® fireplaces meet the requirements of the standard
EN 13240
, also the product’s
performance according to the quality specifications are monitored on a permanent basis.
3.3. Features marking plate
ARTE® fireplace’s feature marking plate is located on the right side of the appliance.
4. P
ACKAGING
ARTE® is devoted in protecting the environment, so we use as much recyclable materials as possible and the least amount of packaging
materials without compromising the secure transfer of our products.
4.1. Unpacking the fireplace
1.
The product will be delivered on a wooden palette which is lined with wooden side panels and top panel.
(Pic. 4.1.1)
2.
Firstly remove the side panels.
(Pic. 4.1.2)
3.
Carefully remove the plastic membrane and the waterproof plastic film and also all the polystyrene on the outside and inside of the
product.
4. Unscrew the 4 screws located on the bottom side of the product, in order to release the fireplace from the palette. (Pic. 4.1.3)
5.
Carefully pick up the product and place it on the installation point, making sure that the floor can withstand the weight of the device. If
the existing construction cannot withstand the weight of the device, a load distributing plate is necessary. Also, make sure you provide
proper insulation in case the floor is built using flammable materials.
Pic. 4.1.1 Pic. 4.1.2 Pic. 4.1.3