manualshive.com logo in svg

Arsenal FU 321M, Руководство по эксплуатации и техническому обслуживанию, Страница: 27 / 64

Поделиться
Скачать
Arsenal FU 321M Скачать руководство пользователя страница 27

OPERATING AND MAINTENANCE MANUAL FU 321M

24

* Carefully clean all electrical surfaces with the machine disconnected

from the mains.

* Check oil and grease level. Fill if necessary. The regularity of the units

greasing is shown in Fig.8a.

* Check for oil leaks.

* Check that all tubes are well connected and do not present leaks. If any

fault has been detected, take the necessary steps.

* Overall cleaning of the windows of the workspace’s safety-guard and their

exchange, if necessary.

WEEKLY MAINTENANCE

* Continue with the daily maintenance.

* Clean the spindle nose and check for cracks or other visible damage

  and that the work holding can be performed smoothly.

MONTHLY MAINTENANCE

* Continue with the weekly maintenance.

* Clean the electrical control.

* Check the machine levelling and that the anchoring bolts are tightly

bolted down.

* Set all slide gib strips if necessary.

* Check the terminals of the electrical connections to see if they have

loosened or become disconnected.

* Drain the coolant and change it every two months.

HALF-YEARLY MAINTENANCE

* Continue with the monthly maintenance.

* Clean the electrical control and the machine.

* Clean the greasing and coolant tanks, and change oil, coolant and

filters if necessary.

* Check the bearings making a noise and change them if necessary.

Содержание FU 321M

































































Отзывы:

Нет отзывов