Arsenal FU 321M Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 64

Arsenal FU 321M Скачать руководство пользователя страница 26

OPERATING AND MAINTENANCE MANUAL FU 321M

23

MAINTENANCE

SAFETY PRECAUTIONS

Complying with the following advice may reduce the possibilities of an accident
when carrying out maintenance. However, depending on where the machine is
installed and the type of work (amongst other factors), additional safety measures
might be necessary.

* Maintenance should be carried out by qualified staff. Each person
should only carry out the area of maintenance which has been as-
signed to him/her.

* Maintenance staff should follow the instructions given by the manu-
facturer, or in the case of replacing a machine component, the instruc-
tions of the manufacturer or dealer of that component.

IMPORTANT:

if in doubt, consult the manufacturer.

* Do not smudge or tear off the safety stickers provided by the manu-
facturer.

* It is important to provide safety gear, appropriate tools, adequate
lighting, material and spare parts with the same or equivalent specifica-
tions as the original ones, warning signs, etc. when carrying out main-
tenance or repairs.

* Study the problem in case of machine break down. If the cause has
been detected, work out a workplan (staff, estimated work time, material
and spare parts, technical information, etc.). In any other case, do not
touch anything, but consult the manufacturer or the machine dealer.

* Keep a logbook with all information related to maintenance and repairs.
All maintenance staff should have access to this information.

A good periodical and preventive maintenance schedule can guarantee efficient
machine performance for many years.

DAILY MAINTENANCE

* Clean swarf, dust and dirt from work table and bed.

* Drain oil and fluids from the table.

* Clean all sliding surfaces.

* Clean the visible spindle surfaces.

«
...
24
25
26
27
28
...
»

Содержание FU 321M

































































Отзывы:

Нет отзывов