Arrow 697.68608-A, Руководство пользователя и инструкции по сборке

Страница: 29 / 43

29
● ●
● ● ●
Right Gable Assembly (2)
● ● ● ● ●
Left Gable Assembly (2)
● ● ● ● ●
6382 Center Gable Brace (2)
● ● ● ● ●
10462 Roof Beam (4)
● ● ● ● ●
10462 Roof Beam Assembly (1)
● ●
● ● ●
6372 Gable Strut (2)
●
Parts Needed For
●
Roof Beams 12x10
Step 18
STEP
1
STEP
STEP
2
3
BW29
1
Lift and fasten a right gable as-
sembly at top of lintel using bolts &
screws.
2
Lift and fasten a left gable assem-
bly at top of rear frame using screws.
3
Install single roof beams to gable
braces using bolts and nuts.
4
Fasten gables to left side of build-
ing in the same manner.
5
Join left and right gables together
with a center gable brace using 3
bolts and nuts, at middle holes.
6
Apply weather stripping along
the mating edge of the left and right
gables as shown. Cut the weather
stripping to length.
7
Install single roof beams to the
left side of building in the same
manner. Slide a roof beam as-
sembly over center gable flange
and fasten.
8
Fasten a gable strut to the middle
roof beam behind the front gable by
placing tab on end of strut
between
the roof beams. Align the tab with
holes and fasten strut with 2 bolts.
9
Fasten the lower end of the strut to
center gable flange with 2 bolts.
NOTE
Do not tighten bolts and nuts
until the strut is assembled at rear
10
Repeat Steps 8 & 9 for rear of
building.
STEP
5
STEP
10
STEP
6
STEP
4
STEP
7
STEP
9
STEP
8
Spread Two Halves
Of Roof Beams
6382
6372
6372
10462
#10-32 Square Not
#8Ax5/16" Screw
Weather
Stripping
Tape
#10-32x7/16" Bolt