Arrow 697.68608-A, Руководство пользователя и инструкции по сборке

Страница: 31 / 43

31
●
Parts Needed For
●
Corner Roof Panels All Sizes
Step 20
STEP
1
STEP
STEP
2
3
BW31
● ●
● ●
●
7826 Right Roof Panel (2)
● ●
● ●
●
7827 Left Roof Panel (1)
Installing the roof panels is best done
with a step ladder. Each screw and
bolt in the roof requires a washer.
Support lintel by propping up at cen-
ter with a wood 2x4 until sag is gone
and there are no buckles in gables.
1
Position a right roof panel at the
front left corner and fasten to the gable
and roof beams using screws and
bolts as shown.
Do not fasten the
lower end of the panels to the side top
angle at this time.
Hint: Follow the fastener sequence
shown, for proper alignment.
2
Install the left roof panel for the right
side in the position shown. Remove
lintel support.
3
Temporarily install a second right
roof panel loosely as shown, for re-
moval later. Do not fasten left rear
panel at this time.
NOTE
If roof beam holes do not line up
with the roof panel holes, shift the
building from left to right.
If this does not help, your building
may not be level. Shim the
corners until holes line up.
FRONT
RIGHT CORNER ROOF PANEL LEFT CORNER ROOF PANEL