Arrow 697.68608-A, Руководство пользователя и инструкции по сборке

Страница: 25 / 43

Step 13
BW25
●
Parts Needed For
●
Side or Rear Entry Door All Sizes
● ● ● ● ●
7946 Door Jamb (2)
● ● ● ● ●
7948 Door Wall Brace (1)
● ● ● ● ●
7972 Door Handle Lock Bracket (1)
25
Direction of Sliding Door
#6Ax7/8" Screw
STEP
3
7948
STEP
2
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both door
jambs.
1
Place door wall brace behind wall
panel in the direction of sliding door.
Fasten panel to brace using screws.
2
Overlap rib of wall panel with a
door jamb and fasten at top to angle,
middle to brace, and bottom to frame
using #6Ax7/8" screws and spacers.
Position spacer inside wall panel rib.
3
Fasten outer flange of door jamb to
wall panel using 3 screws.
4
Secure the door handle lock
bracket to the opposite door jamb at
the middle hole with a (no slot) bolt.
Remove and reinset
screws from panel
STEP
4
7972
#10-32x7/16"
(No Slot) Bolt
7946
7946
STEP
1
#8Ax5/16" Screw
Inside of
Building