Arrow 697.68608-A, Руководство пользователя и инструкции по сборке

Страница: 27 / 43

27
● ● ● ● ●
Right Gable Assembly (1)
● ●
● ●
●
10462 Roof Beam (4)
● ● ● ● ●
Left Gable Assembly (1)
● ●
● ● ●
6382 Center Gable Brace (1)
● ● ● ● ●
10462 Roof Beam Assembly (1)
● ● ● ● ●
6372 Gable Strut (2)
●
Parts Needed For
●
Roof Beams 12x17, 12x24 & 12x31
Step 16
STEP
1
STEP
STEP
2
STEP
7
3
STEP
5
BW27
1
Lift and fasten a right gable assem-
bly at top of lintel using bolts & screws.
2
Install single roof beams 10462 to
the gable braces at the front section.
3
Lift and fasten a left gable assem-
bly in the same manner.
4
Join left and right gables together
with a center gable brace using 3
bolts and nuts, at middle holes.
5
Apply weather stripping along the
mating edge of the left and right gables
as shown. Cut the weather stripping
to length.
6
Install single roof beams to the left
side of building in the same manner.
Slide a roof beam assembly 10462
over center gable flange and other end
over center gable braces on truss and
fasten using bolts & nuts.
7
Fasten a gable strut to the middle
roof beam behind the front gable by
placing tab on end of strut
between the
roof beams. Align the tab with holes
and fasten strut with 2 bolts.
8
Fasten the lower end of the strut to
center gable flange with 2 bolts.
9
At the truss assembly the gable struts
are attached between the middle roof
beam and center brace.
NOTE
Do not tighten bolts and nuts
until all struts are assembled.
STEP
8
STEP
9
STEP
6
STEP
4
6382
Weather Stripping
#10-32 Square Nut
#8A x 5/16" Screw
10462
6372
#10-32 x 7/16" Bolt
6372