In
s
ta
ll
a
ti
o
n o
f t
h
e C
a
m
e
ra
28
5.7.
Grip System
The multipurpose grip system on the ARRIFLEX D-21
guarantees high stability through its fixed connection to
the camera body and provides numerous possibilities
for attaching accessories. Five 3/8" inner threads
allow attachment in diverse positions
➪
image
.
Additional Hand Grips
Additional hand grips can be screwed onto the
grip system in various positions as required.
There are two types of hand grips.
Version without registering pins:
Using a 5 mm Allen key, turn the 3/8" threaded
•
bold into the hand grip as far as it will go.
Turn the hand grip to screw it into the grip system.
•
Pull tight to enable the safety mechanism
•
which prevents loosening.
Version with registering pins:
Place the hand grip on the grip system so the
•
registering pins are inserted into the provided holes.
Using a 5 mm Allen key, tighten the hand grip to
•
the grip system with the 3/8" threaded bolt.
Removing the Grip System
In order to minimize camera height, the
entire grip system can be removed.
Using a 3 mm Allen key, loosen both
•
the hexagon screws
➪
image
in the strut
and pull the grip system upwards.
To attach the grip system, proceed in the reverse order.
•
Note: To provide an even sturdier hand grip
system with additional attachment points for
accessories, the camera can also be equipped
with the low mode short set. See chapter
12: Accessories for more information.
Hexagon screws
Grip system