ARRI ARRIFLEX D-21 HD, Инструкция по эксплуатации

Страница: 91 / 148

F
u
n
c
ti
o
n
a
l E
x
p
a
n
s
io
n M
o
d
u
le F
E
M
-2
91
Using the Wireless System
The channel selection switch is used to adjust the
correct radio frequency channel for data transfer
according to the table to the right. Make sure to
set both camera and assigned wireless main unit
to the same channel to enable communication.
Note: If two yellow washer remote systems are used on
the same set, it is recommended to set one system
to an even and the other to an odd channel.
Regional radio guidelines must be observed. Do not
use RF channels that are not permitted in your
country!
Channel Frequency Use
0 2444 – 2472 MHz Europe except France and Spain.
To be used in the USA, Canada,
Mexico, New Zealand.
1 2406 – 2345 MHz Europe except France and Spain.
To be used in the USA, Canada,
Mexico, New Zealand.
2 2444 – 2472 MHz Europe except Spain
3 2406 – 2345 MHz USA, Canada, Mexico,
New Zealand, France
4 2444 – 2472 MHz Japan
5 2406 – 2345 MHz Australia
6 2444 – 2472 MHz Australia
7 2406 – 2345 MHz Spain
8 2444 – 2472 MHz Corresponds to channel setting 0
9 Radio device deactivated