S
ig
n
a
l C
o
n
n
e
c
ti
o
n
s
67
HD422 High Speed Setup (Standard Mode)
[10]
Set "Frame Rate" between 48 and 60PsF.
•
Set "HD-SDI Mode" to HD422.
•
• Set the recording system input format
to 4:2:2 YCbCr 1080PsF/i dual link using
the frame rate set on the camera.
Connect camera output HD-SDI 1, link
•
A to recording input HD-SDI IN A.
Connect camera output HD-SDI 2, link
•
A to recording input HD-SDI IN B.
Connect recording HD-SDI monitor out to
•
control monitor input HD-SDI IN A or B
Note:
HD422 output above 30PsF requires the use of two HD-SDI
output boards. Each board outputs the same signal on link A
and B. Using link A is recommended. Devices connected via
single link on HD-SDI 1 or 2 will only receive every other frame.
Note:
Recording HD422 output above 30PsF using a dual link
connection is not supported by all recording systems.
Depending on the recording system, live monitoring of these
signals may not be possible or restricted to output of every
other frame. For more information on HD422 dual link output
and recording system requirements, see chapter 15: Appendix.
Note:
Please refer to the recording system’s user
manual for information and instructions on
48/50/59.94/60p 4:2:2 dual link recording.
Note:
For information on custom frame rates and
ramps see chapter 9: Camera Operation.
[10] HD422 high speed setup not available on the ARRIFLEX D-21 HD.
B
A
C
on
tro
l M
on
ito
r
HD-SDI
IN
MONITOR
HD-SDI OUT
B
A
R
ec
or
di
ng S
ys
te
m
B
A
HD-SDI 2
B
A
HD-SDI 1
ARRIFLEX D-21
B
A
HD-SDI
OUT
Input Format:
4:2:2 Dual Link
50p
HD-SDI
IN
On Screen Menu:
50 PsF
HD422
Normal Range
Camera Display:
∢
180.0
fps 50.000
