S
a
fe
ty I
n
s
tr
u
c
ti
o
n
s
13
Operate the system using only the type of power
source indicated in the manual! Unplug the power
cable by gripping the power plug, not the cable!
Never insert objects of any kind into any part of the
system through openings, as the objects may touch
dangerous voltage points or short out parts! This
could cause fire or electrical shock.
Unplug the system from the power outlet before
opening any part of the system or before making
any changes to the system, especially the attaching
or removing of cables!
Do not use solvents to clean!
Do not remove any screws that have been secured
with paint!
Attention! Danger of injury!
Never place your hand in the lens mount receptacle
or the inside of the camera while it is running!
Specific Safety Instructions
Never run the camera without a lens or a protective
cap in the lens mount receptacle!
Remove the all cable connections before transport
or servicing!
Changing camera lenses should be done in a dry
and dust-free environment. If this is not possible,
take extra care that no dust enters the camera
while the lens is off!
Before removing the lens, always make sure to stop
the mirror shutter! This not only prevents damage
to the shutter in case a wrong lens is inserted (e.g.
16 format lens). The shutter in "finder-open"
position acts also as a protective cover to the
sensor.
When no lens is attached to the camera, use the
protective cap to avoid sensor contamination!
After changing lenses, always perform a dust check
to make sure no dust has settled on the sensor
cover glass!
Clean optical lens surfaces only with a lens brush or
a clean lens cloth! In cases of solid dirt, moisten a
lens cloth with pure alcohol!
Discard contaminated lens cloth after use!
Do not use it to clean lens!