C
a
m
e
ra C
o
n
fi
g
u
ra
ti
o
n
62
To access the status information:
Enter "Diagnostics", "Status".
•
Use "Next" to proceed to the next status page.
•
Use "Back" to go to the previous status page.
•
Use "Exit" to leave the diagnostics menu.
•
Status and Imaging Status Indications
The imaging status LEDs on the back of the camera
provide basic information on the general status of the
camera's imaging and image processing module.
Indicator
Meaning
Diagnostics
Green
All system checks normal.
Red
One/more system check failed. Restart camera. Perform standard reset.
Take camera to ARRI service center if problem persists.
Temperature
Green
Sensor temperature at nominal level.
Off
Slight sensor temperature deviation from nominal level. Turn camera off and wait 5 minutes before turning
it back on. Make sure that air can flow through the ventilation shafts at the back of the camera body.
Red
Sensor temperature deviation from nominal level above acceptable limit. Possible malfunction of internal cooling
system. Turn camera off and wait 5 minutes before turning it back on. Make sure that air can flow through the
ventilation shafts at the back of the camera body. Take camera to ARRI service center if problem persists.
Power
Green
Internal power supply levels normal.
Red
Problem with internal power supply. Restart camera. Take camera to ARRI service center if problem persists.
Red blinking
Standard reset performed. Restart camera to complete.
Power
Temperature
Diagnostics
