manualshive.com logo in svg

Array electronic 3720A, Руководство пользователя

Поделиться
Скачать
Array electronic 3720A Скачать руководство пользователя страница 68

 

 65

5.1.3 GPIB 

GPIB is optional. It can be used only when the load has installed GPIB communication module 

and the relevant driver has installed on the computer. Use GPIB cable to connect the load to a 
computer correctly. Select the GPIB interface in the MENU, and set GPIB address. Each instrument 
you connect to the GPIB interface has a unique address assigned to it. Input the right SCPI command 
to operate the load. 

 

5.2 Flow Control Selection 

When RS232 interface is used, the flow control can be enabled or disabled. The load provides 

two options: ON and OFF. ON: enabling the flow control; OFF: disabling the flow control. When 
“OFF” is selected for flow control, the lower baut rate should be set to ensure normal communication. 

 

5.3 Remote Control Annunciators 

There is a REM annunciator on the front panel of the load. When the load receives the remote 

command (SYSTem:REMote) via RS232 or GPIB interface, the REM annunnciator turns on. And the 
load enters remote control status. In this status, all operations on the load are controlled by the remote 

controller; the front panel keypad and knob has no effect (except 

 key + 

 key). The REM 

remote control annunciator turns off and the load returns to the local control after receiving the 
command to return to local control (e.g. SYSTem:LOCal). Or you can return the load to local control 

from remote control by pressing 

 key + 

 key. 

 

5.4 Sending a Remote Command 

You can use the computer to set operation mode and operation parameters remotely for the load. 

 

5.5 Returning Data 

The load can return the values of parameter settings, input voltage and current, as well as input 

power to computer. It can also return information relating to the internal operation and module 
identification. For example: the query command ( “MEAS:CURR?”) asks the load to return the 
actual  current at the Input binding posts. Please refer to “ARRAY 372x Series Electronic Load 
SCPI Programming Guide” for detailed information on using query commands. The load stores the 
response to the query in an output buffer which will hold the information until it is read by the 
computer or is replaced with new information. 

 

5.6 Remote Programming Commands 

The SCPI commands have many optional key words for the programmer. Getting familiar with 

those key words will help you to know the programming better. Most of the commands have a query 
syntax which allows the present parameter settings to be returned to the controller. Please refer to 
“ARRAY 372x Series Electronic Load SCPI Programming Guide” for details. The load` s major 
functions can be programmed with a relatively few number of these commands. The following points 
are important to remember when you are remotely programming CC, CR, CV, and CP values.   
 

5.6.1 Modes 

Содержание 3720A

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды