51
1
Press
key +
key to enter into sequence operation
menu.
►
No.: 0
Memo:
2
Use Entry keys or the knob to set the sequence number (No.) to
0, and press
key to confirm (recall the sequence in
EEPROM assigned by the sequence number).
►
No.: 0
Memo:
3
Use
key to select sequence memo (Memo).
No.: 0
►
Memo:
_
4
Rotate the knob to select the letter “T”.
No.: 0
►
Memo:T
5
Use
key to move the cursor to the right.
No.: 0
►
Memo:T_
6
Rotate the knob to select the letter “e”.
No.: 0
►
Memo:Te
7
Set Memo to “Test Power” according to step5 and setp6
operations. Press
key to confirm.
No.: 0
►
Memo: Test Power
8
Use
key to select Data:<New/Edit>.
►
Data:<New/Edit>
Count: 1
9
Use
key or knob to select New, and press
key to
confirm.
Clear Data:
Yes *No
10
Use
key or knob to select Yes, and press
key to
confirm. The data is cleared and step edit screen appears.
01.
0.00000s
CCH 0.000A
11
Edit the step1: CCL, 1A, 1S. The time set value in the upper
right corner of the display flashes. Use Entry keys or the knob
together with
,
keys to input time to 1s, and press
key to confirm.
01.
1.00000s
CCH 0.000A
12
The basic mode showed in lower left corner of the display
flashes. Use the knob or
key to select operating mode to
CCL, and press
key to confirm.
01.
1.00000s
CCL 0.000A
13
The set value in the lower right corner of the display flashes.
Use Entry keys or the knob together with
,
keys to
input the current value to 1A. Press
key to confirm and
enter into the next operation.
01.
1.00000s
CCL 1.0000A
14
Repeat the procedures 11 through 13 to set the rest four steps.
