Arneg Atlanta, Инструкция по установке и эксплуатации

Страница: 42 / 140

Atlanta
English
05060191 00 06-2021 15
20. 1 Cleaning products
Use - clean water at maximum temperature of 30°C
- soft cloth
- mild and neutral detergents
Do not use
alcohol-based
- detergents or similar products to clean the parts in methacrylate (Plexiglass)
- in powder
- with granules
- either acidic or alkaline (bleach, ammonia)
- concentrates
- with unknown chemical composition
- abrasive products, chemical/organic solvents
- abrasive sponges, scourers, sharp tools
- aggressive solvents (acetic acid, citric acid etc.)
20. 2 General information
• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Dry the surfaces with a soft cloth
CAUTION !
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasticised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
Do not use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and con-
taminate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
CAUTION
!
Floor products. Vapours. Corrosion. Breathing difficulty.
avoid contact, inhalation.
20. 3 Cleaning of the outer parts (Daily/Weekly)
Clean all external parts of the cabinet every week. See “General instructions” chapter20. 2.
20. 4 Clean the internal parts (Monthly)
Refer to chapters 20. 1 and 20. 2 and proceed as follows:
Step Action
1
remove all items from the cabinet and place in a suitable location to maintain the same stor-
age temperature
2 remove all the removable parts, such as display dishes, grid trays, etc.
3 wash with lukewarm water (max 30°C)
4 clean with an antibacterial detergent
5
carefully clean the bottom tank, the drip, and the grid that protects the water drain, elimi-
nating all foreign bodies that have fallen through the suction grid lifting the sheet of the fans
6 carefully dry using a soft cloth.
i
Should you notice ice built up, call a specialized technician.