Arkray SillHa LH-4912 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 76

background image

5

SillHa Oral Wellness Instrument

Intended Use

SillHa is an oral health assessment instrument, providing information to assess
gum health, tooth health and oral cleanliness. The instrument uses oral rinse
(saliva) samples from individuals to perform this assessment. The instrument is
not intended for diagnosis. It is to be used by dental health care professionals
(such as dentist, hygienist, etc.) to help with patient education on oral wellness.

Introduction

This operating manual contains important information on the functions of SillHa
Oral Wellness System. Read carefully prior to using and retain for future
reference.

This manual provides an overview and the proper procedures for operation and
maintenance. The use of this device by a method or for a purpose other than
those presented herein shall not be guaranteed.

This product conforms to the EMC Standard IEC61326-1:2012(EN61326-1:2013).
Class of emission: CISPR 11 Class A.

NOTE: This instrument has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
instrument is operated in a commercial environment. This instrument generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the operating manual, may cause harmful interference to radio
communications. Operation of this instrument in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.

The electromagnetic environment should be evaluated prior to operation of the
device.

Do not

use this device in close proximity to sources of strong

electromagnetic radiation, as these may interfere with the proper operation.

© ARKRAY, Inc.

• It is strictly prohibited to copy any part of this operating manual without the

expressed consent of ARKRAY, Inc.

• The information in this operating manual is subject to change without notice.

Intended Use

& Introduction

«
...
3
4
5
6
7
...
»

Содержание SillHa LH-4912













































































Отзывы:

Нет отзывов

Похожие инструкции для SillHa LH-4912

Бренд: Qingdao H.Y Страницы: 6

Бренд: BANLAW Страницы: 32

Бренд: Baker Instrument Company Страницы: 24

Бренд: ParaBody Страницы: 6

Бренд: Sailmon Страницы: 10

Бренд: B&W Tek Страницы: 12

Бренд: b&o Страницы: 46

Бренд: Cadex Страницы: 300

Бренд: Datalogic Страницы: 20

Бренд: Datalogic Страницы: 188

Бренд: Eazyzap Страницы: 32

Бренд: Obdstar Страницы: 42

Бренд: LA Audio Страницы: 9

Бренд: B-K lighting Страницы: 2

Бренд: Yacht Devices Страницы: 68

CIRCOLINA G10q T9

Бренд: Life Страницы: 2

Бренд: DAAB Страницы: 12

Бренд: Daekyung Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды