Arkray SillHa LH-4912, Руководство по эксплуатации

Страница: 36 / 76

36 ARKRAY
2.6 At the End of the Day
When all daily tests and cleaning are complete, power off the instrument.

Clean the test strip holder.
• See 4.2.1. Cleaning the Test Strip Holder on page 61.

Press and hold the power button of the instrument.
• The test strip holder will retract inside the instrument.
• The display and power will turn off.

Exit the SillHa software.
• Click [Menu] to return to the Top menu screen.
• On the Top menu screen, click [X].
• When “Close?” appears, click [OK].
2.7 Check Measurement
If test results seem inaccurate, perform a check measurement using a check strip
to check the condition of the instrument. Instructions are shown on the instrument
screen.

Clean the test strip holder.
• See "4.2.1. Cleaning the Test Strip Holder"
on page 61.

Turn on the instrument: Hold the power button until a beep is heard.

Run the SillHa software by clicking the icon on the PC.

On the Top menu screen, tap [Maint.] and [Check], in that order.
• The Check screen will appear.
NOTE:
If dirt adheres to the test strip holder,
the check strip may be contaminated
and lose its effectiveness.
2.6