Arjohuntleigh Miranti, Инструкция по эксплуатации

Страница: 16 / 44

16
4 Buckle the safety belt by inserting the buckles into each
other. Make sure the fastening clip has the arrow shaped
side upwards
(A) . (See Fig. 5)
5 Unbuckle the safety belt by pressing the spring knobs (A) ,
and at the same time pulling the buckles apart from each
other. (See Fig. 6)
Adjust (6 steps)
Upper safety belt is shown
1 Pull the fastening clips (A) and (B) apart by twisting the
smaller fastening clip (A) slightly upwards. (See Fig. 7)
2 Loosen the safety belt by pulling the inner strap (A) and at
the same time lifting the larger fastening clip (B) .
(See Fig. 8)
3 Tighten the safety belt by pulling the outer strap (A) and at
the same time holding the larger fastening clip (B) .
(See Fig. 9)
4 Make sure the safety belt is firmly attached to the patient’s
body.
Continue with the steps on the next page.
Fig. 5
A
Fig. 6
A
A
Fig. 7
A
B
Fig. 8
B
A
Fig. 9 A
B