Arjohuntleigh Miranti, Инструкция по эксплуатации

Страница: 15 / 44

15
Safety Belt
s
The Miranti lift bath trolley has two safety belts, one to be used
over the chest and one over the legs. They are identical and are
used in the same way.
The upper safety belt or both can be used. Do not use the lower
safety belt only.
(See Fig. 1)
Attach and Buckle (5 steps)
1 Attach the safety belt by pushing the eyelet closest to the
buckle over the knob.
(See Fig. 2)
2 Make sure that the belt fits the knob in the inner position.
(See Fig. 3)
3 Upper safety belt only: Attach the hook rope over the
safety belt and the knob according to section Powered
Backrest/Hook Rope on page 11 . (See Fig. 4)
Continue with the steps on the next page.
WARNING
To prevent the patient from falling, make sure the
safety belts are undamaged. If damaged, do NOT
use the safety belts, replace with new ones before
use.
WARNING
To avoid falling, make sure that the patient is
positioned correctly and that the safety belt is being
used, properly fastened and tightened.
Fig. 1
Fig. 2
Fig. 3
Fig. 4