Arjohuntleigh Miranti, Инструкция по эксплуатации

Страница: 26 / 44

26
Cleaning (step 4-11 of 17)
4 Put on protective gloves and glasses.
5 Most ArjoHuntleigh baths are equipped with a spray handle
for disinfecting purposes. Read the bath instructions on how
to use the disinfectant. Check the level of the disinfectant.
6 If you do not have the integrated disinfection equipment,
you can use a spray bottle containing disinfectant mixed
according to the printed instructions on the disinfectant
bottle.
7 Spray disinfectant on (See Fig. 3, 4 and 5) :
• the upper part of the Miranti lift bath trolley
• all removed parts
Use a brush soaked in disinfectant and scrub thoroughly,
especially on handles and hand control. On the
Miranti lift
bath trolley: pay extra attention to the hinges and the
foundation of the patient security grip on the upper side of
the stretcher and the channel on the underside of the stretcher.
8 Shower with water (approx. 25 °C (77 °F)) or spray with
plenty of water and wipe off with a clean cloth to remove all
disinfectant.
9 Soak a cloth in disinfectant and wipe all other areas of the
Miranti lift bath trolley, such as chassis.
10 Wet a new cloth with water and remove all traces of
disinfectant from all other areas of the Miranti lift bath
trolley. The cloth should occasionally be rinsed in running
water when removing disinfectant.
11 If all disinfectant cannot be removed, spray water on the
affected part and wipe off with disposable towels. Repeat
until all disinfectant has been removed.
Continue with the steps on the next page.
Fig. 3
Fig. 4
Fig. 5