Arjohuntleigh 700-31400, Руководство по установке

Страница: 21 / 28

001-31430-EN r
ev.1 • 05/2017
Troubleshooting 17
Troubleshooting
Should there be a malfunction with the Maxi Sky 2 Transportable following the installation of the
receiving module, please verify the following points:
List of Potential Problems Solutions/Actions
The Rivet does not come
down once both sets of
wheels are inserted.
• Call your local ArjoHuntleigh representative.
The Receiving Module does
not lock in place when the
door is open.
1. Call your local ArjoHuntleigh representative.
2. Replace the Receiving Module.
The Receiving Module’s
door does not clip when it is
closed.
1. Call your local ArjoHuntleigh representative.
2. Replace the Receiving Module.
The slider is broken or
missing.
1. Call your local ArjoHuntleigh representative.
2. Replace the Receiving Module.
The Rivet is broken or
missing.
1. Call your local ArjoHuntleigh representative.
2. Replace the Receiving Module
The lift does not work when
pressing buttons on the
hand control.
1. If the emergency stop is activated, gently push up the
Emergency Stop to turn the unit back ON and look for the
green light LED indicator to light up;
2. Check if the batteries are charged, if not:
a If you have a C-Stat system, make sure the contact
blades are in contact with the charging station located on the
side of the Kwiktrak;
b If you have an ECS system, make sure the ECS cable
of the receiving module is plugged into the ECS interface of
the ECS Maxi Sky 2 Transportable, check if the LED green
light located on the ECS interface is lit and lastly, check if
the ECS interface is correctly in place inside the Maxi Sky 2
Transportable.
3. Let the Maxi Sky 2 Transportable charge for 8 hours.
The lift does not charge
when plugged to the
charger (storage or inside
the track).
1. Verify charger is plugged to the wall;
2. For the ECS model --- verify that the LED located on the
conversion kit is lit;
3. Check to see if the Emergency Stop is pushed in or pulled
out. It should be pushed in;
4. If all of the instructions above are done correctly and the unit
still does not charge, call your local ArjoHuntleigh
representative.