Arjohuntleigh 700-31400, Руководство по установке

Страница: 13 / 28

001-31430-EN r
ev.1 • 05/2017
9 Install/Remove Maxi Sky 2 Transportable
How to install the Maxi Sky 2 Transportable inside the Receiving Module
1) Open the door of the receiving module, which
locks the module in place and enables the
insertion of the Maxi Sky 2 Transportable's
wheels inside; (Fig. 11)
REMINDER:
In order for the Maxi Sky 2 Transportable to
charge when inserted into the receiving module,
it has to be inserted the right way:
The
Maxi Sky 2 C-Stat Transportable should be
inserted according to the location of its charging
station, along one of the sides of the Kwiktrak.
(Fig. 12)
The
Maxi Sky
2 ECS Transportable should be
inserted ECS interface-side first. (Fig. 13)
2) With the Maxi Sky 2 Transportable’s trolley,
gently lift the slider of the receiving module
up with the wheels and slowly slide the first
set of wheels inside the module; (Fig. 14)
3) Continue inserting the wheels inside the
module (Fig. 15) until you hear a “click”,
indicating the rivet has come down and both
sets of wheels are secured inside the
receiving module; (Fig. 16)
CAUTION: To prevent possible damage to
product, do not open door under clip on
accessories such as charging/detection station.
WARNING: To avoid bodily injuries, do not
open door when receiving module is inside
an accessory such as a turn-table, an
exchanger or a gate.
Fig. 11
C-Stat
ECS
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16