Arjo E9X Скачать руководство пользователя

Страница: 50 / 68

Weighing system

Be sure to follow all local guidelines or regulations regarding weigh scale
verification and calibration.

The weigh system should be re-verified before the date of expiry shown on
the bed. Make sure the bed is re-verified every 12 months. If verification
does not pass, the weigh system should be re-calibrated.

Refer to the product service manual for verification and calibration
procedures or contact an approved Arjo service agent.

Fig. 26 - Weighing Calibration Expiry Label

WARNING

The procedures below must be carried out by suitably trained and qualified
personnel. Failure to do so may result in injury or an unsafe product.

Actions to be done by qualified personnel

Yearly

Check that the bedstripper (linen shelf) (Optional) remains in its closed
position when maximum foot down tilt is applied

Check that the bed operates correctly using the backup battery as described
in the section “Battery test” on page 51.

Check operation the of castors, paying special attention to braking and
steering functions

Check that the calf section moves to the Fowler position when the thigh
section is raised

Check that the calf section latches securely in the horizontal (vascular)
position when manually raised.

Check that the bed extension locks securely in all three positions

Examine the power supply cord and mains plug; if damaged, replace the
complete assembly; do not use a rewireable plug

Examine all accessible flexible cables for damage and deterioration

Check all accessible nuts, bolts and other fasteners are present and correctly
tightened

Check any accessories fitted to the bed, paying particular attention to
fasteners and moving parts

Содержание E9X





































































Результаты поиска

Содержание E9X

Отзывы:

Похожие инструкции для E9X

Бренды по названию

Популярные бренды

Arjo E9X, Инструкция по эксплуатации

Результаты поиска

Содержание E9X

Отзывы:

Похожие инструкции для E9X

Бренды по названию

Популярные бренды