Arjo E9X Скачать руководство пользователя | Manualshive

Страница: 19 / 68

background image

19

Split side rails

To lower the split side rail:

Hold either split side rail handle (

1

). Pull the blue release lever (

2

) and lower

the split side rail (

3

), holding the split side rail until it is completely lowered.

The split side rail folds down below the mattress platform.

Fig. 7 - Split side rail operation

To raise the split side rail:

Hold either split side rail handle (

1

). Pull the split side rail up and away from

the bed until it locks in the raised position.

WARNING

The clinically qualified person responsible should consider the age, size and
condition of the patient before allowing the use of split side rails.
Split side rails are not intended to restrain patients who make a deliberate attempt to
exit the bed.
Ensure that the mattress is suitable for use with split side rails - see “Mattresses and
split side rails” on page 15.
To prevent possible entrapment, make sure the patient’s head and limbs are clear of
the split side rails when adjusting the mattress platform.

Split side rail contact points are identified by this symbol. Keep hands and
fingers away from these areas.

NOTE
The head end and foot end split side rails operate in the same way.

1

2

3

WARNING

Make sure the locking mechanism is securely engaged when the split side rails are
raised.

«
...
17
18
19
20
21
...
»

Содержание E9X





































































Отзывы:

Нет отзывов

Похожие инструкции для E9X

Бренд: Daavlin Страницы: 13

Бренд: Daavlin Страницы: 27

D-IMager EKL3104

Бренд: Panasonic Страницы: 13

Бренд: Labokey Страницы: 5

Бренд: E-Z Trail Страницы: 8

Бренд: B&K Страницы: 10

Бренд: Parker Research Corp Страницы: 4

Бренд: Eastwood Страницы: 20

Бренд: Daihan Scientific Страницы: 43

Бренд: Faderfox Страницы: 8

AquaPure Ei Series

Бренд: Jandy Страницы: 4

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

Бренд: Nellcor Страницы: 161

OXIMAX N-600X Series

Бренд: Nellcor Страницы: 210

Бренд: OAKWORKS Страницы: 24

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды