Arjo AtmosAir Velaris Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 52

background image

6

INTENDED USE

6

INTENDED USE

Intended use

The AtmosAir Velaris hybrid mattress system is intended for use by caregivers

1

in acute care,

long-term care and home care facilities, including private homes.

The hybrid mattress system is indicated for the prevention and management of pressure injuries. It
should be used as part of an individualised, comprehensive pressure injury protocol. This includes:
repositioning, nutritional support and skin care. The surface should be selected based on full
assessment of the patient needs.

The hybrid mattress system represents one aspect of a pressure injury management protocol. All other
aspects of care should be considered by the healthcare professional.
If existing wounds do not improve, or the patient’s condition changes the overall therapy regimen
should be reviewed by the healthcare professional.

As guidance the system when used in an unpowered reactive mode is indicated for patients that are
deemed to be ‘At Risk’ of a pressure injury. If the system is used in conjunction with the pump, the
patients with a ‘higher risk pro

fi

le’ may be considered.

2

The above are guidelines only and should not replace clinical judgement.

The Standard mattress system is for patients within the weight range of 40 kg (90 lb) to 250 kg (550 lb).
Heavier patients weighing up to 454 kg (1000 lb) should use the Plus (bariatric) mattress system.

The hybrid mattress system should only be used for the purpose speci

fi

ed in this Instructions for Use.

Any other use is prohibited.

1

Caregiver may be a healthcare professional or lay person who operates this medical device.

2

European Pressure Ulcer Advisory Panel, National Pressure Injury Advisory Panel and Pan

Paci

fi

c Pressure Injury Alliance. Prevention and Treatment of Pressure Ulcers/Injuries:

Clinical Practice Guideline. The International Guideline. Emily Haesler (Ed).

EPUAP/NPIAP/PPPIA: 2019, Chapter 4 Risk Factors and Risk Assessment

«
...
4
5
6
7
8
...
»

Содержание AtmosAir Velaris





















































Отзывы:

Нет отзывов

Похожие инструкции для AtmosAir Velaris

Бренд: Karol Страницы: 7

Бренд: HABYS Страницы: 10

Бренд: feather&black Страницы: 2

Бренд: Qaio Страницы: 5

Бренд: Yaasa Страницы: 100

Бренд: Dancover Страницы: 15

Бренд: Community Playthings Страницы: 2

INDIANA JREG 4so/50

Бренд: BLACK RED WHITE Страницы: 5

Бренд: uhuru Страницы: 2

MANUFACTURE 187228

Бренд: MAISONS DU MONDE Страницы: 4

Бренд: IBR Страницы: 15

CLRENDON DOUBLE ROBE 780924

Бренд: Next Страницы: 19

Бренд: Lightolier Страницы: 2

Oklahoma SL-SHSTOR-2

Бренд: rst brands Страницы: 21

CIH Magnum 8900

Бренд: K&M Страницы: 2

HIGH LOFT BED PANEL FULL

Бренд: Bio Movel Страницы: 12

Бренд: Lyon Beton Страницы: 2

Бренд: Homestyles Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды