24
ASSEMBLE THE HYBRID MATTRESS SYSTEM
Assemble the hybrid mattress system
Assemble the Standard, Plus and ST
mattresses
1. Remove any existing mattress from the bed/
trolley frame.
2. Check that there are no protruding sharp objects
on the frame surface.
3.
Select the correct mattress size for the bed/trolley
frame. Make sure that there are no gaps to trap
the patient’s head or body.
For mattress sizes see section Measurements
and compatibility on page 40
4. For Standard or Plus mattress:
Position the mattress on the bed frame. Make
sure that the mattress is orientated correctly with
the mattress connector at the foot end of the bed
frame. See Figure 29.
For ST mattress:
Position the mattress on the trolley frame. Make
sure that the mattress is orientated correctly with
the cut corners at the head end. See Figure 30.
WARNING
To avoid death or serious injury by
entrapment, always select the correct
mattress size for the bed/trolley.
Figure 29
Figure 30
